Reichert AP250 Podręcznik Użytkownika Pobierz pdf (Strona 7)

6 13800-101-Rev. A

Instructions for Use - Remote Control

The AP250 is operated by a sophisticated remote control that is

divided into various sections for ease of use (see Figure 6,

below).

CHANGING THE EMISSION CODE

The codes of the projector and remote control are factory set

to 0000. It is advisable to change the emission code of the

Remote Control unit if several projectors are used in the same

room, thus avoiding any interaction.

To change the code, follow the steps below:

1. Open the battery compartment on the rear side of the

remote control (see Figure 7, p. 7). Select a new

combination of switch settings by moving the switches

(with a small pointed object). Sixteen combinations are

possible.

2. Turn the projector off. Position the Remote Control at least

5 ft. (1.5 m) away from the AP250's Window for Remote

Detection. Press the IN Program Key while simultaneously

switching on the projector.

Figure 6 - Remote Control Unit

Indicator Light

Red/Green Test

Binocular Balance Test

Illiterate Charts

Children Charts

Letter Charts

Number Charts

Masking Options

Eye Diagram

Filters

Special Charts

Program Keys

Halogen Bulb On/Off

1 2 3 4 5 6 7 8 9 10 11 12 13

Brak uwag

Reichert AP250 Podręcznik Użytkownika Strona 7